ip-profile

Defines the table row index.

Configures an additional information element to send in ISDN Setup message.

Defines the SBC Allowed Audio Coders Group Name (this references a table that contains a list of allowed audio coders).

Defines the SBC Allowed Video Coders Group Name (this references a table that contains a list of allowed video coders).

Defines the AMD Max Greeting Time.

Defines the AMD Max Post Silence Greeting Time.

Configures AMD (Answering Machine Detector) mode.

Determines the AMD level of detection sensitivity.

Determines the serial number of the AMD sensitivity suite.

Defines the maximum number of concurrent calls per IP Profile.

Defines the CNG Detector Mode.

Defines the Coders Group Name.

Enables the device to copy the called number, received in the SIP INVITE message, to the redirect number in the outgoing Q.931 Setup message, for IP-to-Tel calls.

Defines the DiffServ value of MSRP traffic in the IP header's DSCP field.

Defines the behavior when receiving an RTP broken notification.

Defines the maximum time (in seconds) to wait from sending a setup message to the PSTN to receiving a connect message from the PSTN.

Enables Early Media.

Enables echo cancellation (i.e., echo from voice calls is removed).

Enables Early 183.

Enables Call Hold service.

Enables QSIG Tunneling over SIP.

Enables symmetric MKI negotiation.

Defines the SIP signaling method for establishing and transmitting a fax session when the device detects a fax.

Defines the first priority DTMF methods, offered during the SIP negotiation.

Configures generating new SRTP keys on SRTP negotiation mode.

Configures ICE Mode.

Defines the voice TDM Input Gain.

Configures Profile Preference - the priority of the IP Profile.

Enables sending DTMFs on the Signaling path (not on the Media path).

Defines the maximum delay (in msec) for the Dynamic Jitter Buffer.

Defines the minimum delay (in msec) for the Dynamic Jitter Buffer.

Defines the Dynamic Jitter Buffer frame error-delay optimization factor.

Defines the user-defined Held tone by index number as it appears in the PRT file.

Defines the user-defined ringback tone by index number as it appears in the PRT file.

Defines the preference of the Media IP version.

Defines the gateway behavior when receiving offer/response for media encryption.

Defines the size (in bytes) of the Master Key Identifier (MKI) in transmitted SRTP packets. The

Enables Cisco compatible fax and modem bypass mode.

Defines the SBC Play Held Tone.

Enables a ringback tone playing towards IP.

Configures a Profile Name (string).

Determines whether to send the Progress Indicator to IP.

Defines the SBC Reliable Held Tone Source.

Defines the SBC Remote Hold Format.

Resets SRTP State Upon Re-key.

Defines the RTP IP DiffServ.

Defines the RTP Redundancy Depth - enables the device to generate RFC 2198 redundant packets.

Defines the supported receive DTMF negotiation method.

Defines the SBC RFC2833 DTMF Payload Type Value.

Adapts RFC 2833 BW to Voice coder BW.

Enables the device to allow only media (RTP) packets, from the UA associated with this IP Profile, using the single coder (payload type) that was negotiated during the SDP offer/answer exchange.

Defines the SBC Allowed Coders Mode.

Defines the SBC allowed media types (comma separated string).

Defines the SBC Alternative DTMF Method. For legs where RFC 2833 is not negotiated successfully, the device uses this parameter to determine the Alternative DTMF Method.

Defines the device's privacy handling of the P-asserted-Identity header. This indicates how the outgoing SIP message asserts identity.

Defines the device's handling of the Diversion header.

Defines the tag to work without media anchoring.

Defines SBC Enforce MKI Size.

Enables PLC.

Defines the SBC Extension Coders Group Name.

Defines the coders included in the outgoing SDP answer (sent to the calling fax).

Defines the offer negotiation method.

Defines the supported fax coders.

Defines if the fax coders sent in the outgoing SDP offer.

Enables the re-routing of incoming SBC calls that are identified as fax calls.

Enables the device to send RTP or T.38 No-Op packets during RTP or T.38 silence periods (SBC calls only).

Generates silence RTP packets.

Defines the support of X-Detect handling.

Defines the device's handling of the History-Info header.

Defines the ISUP Body Handling.

Defines the ISUP Variant.

Defines the SBC Jitter Compensation.

Keeps the Record-Route and in-dialog Route headers from incoming request in the outgoing request.

Keeps the User-Agent header from the incoming request in the outgoing request.

Keeps the VIA headers from incoming request in the outgoing request.

Limits the call time duration (minutes).

Defines the maximum bandwidth for OPUS [bps].

Defines the transcoding method between SRTP and RTP.

Defines the SRTP method SDES/DTLS.

On an active MSRP leg, enables the device to add the Content-Type header to the first empty (i.e., no body) MSRP message that is used to initiate the MSRP connection.

Defines the device's MSRP role in SDP offer-answer negotiations ('a=setup' line) for MSRP sessions.

Defines if the SIP UA (MSRP endpoint) associated with this IP Profile supports the receipt of re-INVITE and UPDATE SIP messages.

Enables the SBC to respond with multiple answers within the same dialog (non-standard).

Enables the SBC to respond with multiple SIP dialogs (forking).

Plays Ring Back Tone to transferred side on call transfer.

Defines the LEG's related PRACK behavior.

Defines the SBC Preferred Ptime.

Enables the device to receive DTMF digits out-of-band (not with audio stream) using both the SIP INFO and RFC 2833 methods.

Enables the device to change the value of the 'a=mid:n' attribute (where n is a unique value) to 0 (or next consecutive number), if it is present in the outgoing SDP offer.

Affects the RFC 2833 SDP offer/answer negotiation.

Defines the SBC Remote 3xx Behavior.

Configures remote endpoint capability to play a local ringback tone.

Configures SBC remote delayed offer support.

Defines the SBC remote early media response type.

Defines the SBC remote early media RTP mode.

Defines SBC remote early media support.

Defines SBC remote multiple 18x support.

Defines if the remote MSRP endpoint supports the receipt of re-INVITE and UPDATE SIP messages.

Defines if remote renegotiate when fax is detected.

Defines how the SBC manages REFER/INVITE with Replaces.

Defines the SBC remote RFC 3960 gateway model support.

Defines how to represent the SBC's contact information to the remote side.

Defines SBC remote UPDATE support.

Defines RTCP feedback support.

Defines the SBC RTCP mode.

Defines support of RTP-RTCP multiplexing.

Defines SBC RTP redundancy behavior.

Defines SBC SDP Handle RTCP.

Defines SBC SDP Ptime answer.

Defines SBC SDP Remove Crypto Lifetime.

Enables the device to send DTMF digits out-of-band (not with audio stream) using both the SIP INFO and RFC 2833 methods for the same call on the leg to which this IP Profile is associated.

Defines SBC behavior with 'Session-Expires' header.

Defines SBC to use Silence Suppression.

Defines the duration (in seconds) of the periodic registrations between the user and the device (the device responds with this value to the user).

Defines the duration (in seconds) of the periodic registrations between the user and the device when the user registers over TCP and is behind NAT.

Defines the duration (in seconds) of the periodic registrations between the user and the device when the user registers over UDP and is behind NAT.

Activates Voice Quality Enhancement.

Defines the second priority DTMF methods, offered during the SIP negotiation.

Defines the SIP Signaling DiffServ.

Defines the voice transcoding mode between the two SBC legs for the SBC application.

Defines the voice TDM output gain.